Motion & support

Carrier drive, rolling, guidance and structural parts that determine motion quality and accumulated tolerance.

INTEGRATION REVIEW

Define the interfaces before selecting parts.

Specify voltage, speed, roller dimensions, connector, duty cycle and the narrow-belt cart interface as one drive package.

Check shaft geometry, bearings, shell finish, runout and belt tracking against the powered roller and cart structure.

Cart pitch, belt surface, payload, wheels and discharge timing must fit the complete linear-sorter architecture.

Validate frame stiffness, wheel position, interfaces, tolerances and replacement access before production release.

The carrier surface and discharge method must be tested with unstable, soft, round or non-standard items.

Treat the carrier, wheels, power interface, controls and belt discharge as one validated moving assembly.

Belt width, multi-cart loading, transfer stability, drive arrangement and service access define application fit.

Review chain interface, bearings, wheel geometry, stiffness and accumulated pitch tolerance across the sorter.

Tray geometry, release timing, item stability and receiving-chute design must be proven with the real parcel mix.

Frame geometry, stiffness, interfaces and inspection access establish the moving assembly's alignment baseline.

Wheel material, profile, bearing, preload and track tolerance influence noise, vibration and carrier stability.

Send the target sorter architecture, drawings, quantity and operating conditions. MANZUN can review compatibility at assembly level.